Requirements for Plot Plan

PLOT: The plot plan shall be based on a boundary survey conforming with the
Minimum Standards for the Competent Practice of Land Surveying administered by the
Indiana State Board of Registration for Land Surveyors (865 IAC 1-12-) and drawn on
18 inches by 24 inches material at a scale of 1-20 to 1-40. The plot plan shall show
clearly and completely the following items:

1. The location, dimensions, and nature of the property.
2. The location and dimensions of any existing or proposed
   improvements to the property.
3. All adjoining thoroughfares and any existing or proposed
   access to these thoroughfares.
4. The existing and proposed use of all structures and land.
5. The location and type of sewage system, water system,
   and drainage facilities.
6. Legal description of the property.
7. Name, address, telephone number of owner.
8. Existing ground level and proposed elevations of the
   following items.
   a. All corners of the lot.
   b. All corners of the septic field area.
   c. All corners of the proposed structures.
   d. Center line of road, street, or highway,
   at front corners of lot.
   e. Invert of 8 inch drainage tile.  Where property line and designated right-of-way lines intersect.
   g. Any other locations that would provide a complete understanding of existing and proposed conditions.

9. Flood plain information.
10. Building line setback.
11. Setback lines for all structures front, sides, and rear.
12. Parcel member for lot.
13. Such other information as may be deemed necessary by the
    Plan Director.
14. The plot plan must be prepared by a Licensed Land Surveyor or Civil Engineer. The plot must also have the Certification and seal.